|ALL RCS SWITCHES AND TRACK ARE PROUDLY HAND MADE MADE IN AMERICA!
Our switches are available manual... not wired for run through operation..(save $ by doing it yourself) manual pre-wired (a $5.95 option) or RossReady ready to run switches.The RossReady line of switches include the switch machine attatched to the extended ties, a lighted pushbutton controller, and the rails electrically tied together for continuous power throughout. They can easily be separated to deaden a siding by cliping a wire underneath. The DZ1000 and DZ2500 has a very simple to wire non-derailing feature. Lighted switch machine with controller made by Z-Stuff for Trains. Runs with AC power supply. Also works with command control systems. If you are using command control each DZ1000 machine takes up one port on your SC-2 controller or DCS accessory controller. Can be thrown remotely with power or manually without power to the machine.
The DZ2500 switch machine is suited for easier wiring if you are using command control. Used in conjunction with a DZ-2001 Data Line Driver (see accessory category) you can hook up to 99 switch machines to ONE port on your TMCC, Legacy SC-2 controller, or DCS accessory controller. The machines throw slowly when activated by the supplied pushbutton but quickly when hooked up for non-derailing. The DZ2500 machines must have power to throw them and cannot be thrown manually without power. To save you $ the switches do not come with track pins, the track does. Track pins available in the accessory category #903... 50 for $5.95|
|NEW! RossPlate Tubular Rail Switches!|
|As with our Hi-Rail switches,|
|All available with DZ1000 or DZ2500 switch machines|
|Check out our Turntables and Transfer Tables!|
|NEW! Deck Girder Bridges Single AND Double Track |